The Kegco Home Brew Kegerator allows you to dispense your own home brewed beer from the same type of industrial strength beer dispenser that the pros use. This commercial grade keg beer cooler with stainless steel exterior is durably built to withstand the demands of retail environments like a restaurant or tasting room, but small and portable enough to use at home. It is ETL and ETL Sanitation Listed and NSF Compliant, ensuring that it has met the requirements of widely accepted product safety standards for draft beer dispensers. The HBK1XS-1 includes all the components you need to dispense your own home brewed beer from a ball lock keg, including a polished stainless steel draft tower, a Commercial Grade Double Gauge CO2 Regulator and an aluminum 5 lb CO2 tank with a corrosion resistant glossy red coating - upgrades that represent a $25 value at no additional charge!
This beer dispenser has a pre-configured direct draw kit that includes everything you need to dispense a home brew ball lock keg
Stainless steel construction, shock reducing rubber floor mat, foamed-in-place polyurethane insulation and a stainless steel top
Powerful 1/7 hp compressor provides cooling and fans force cool air the draft beer tower to ensure every beer is cold
4" locking casters provide mobility when you want to move it, stability when you don't
ETL and ETL Sanitation Listed and NSF Compliant for commercial use
Includes a brand new 5 lb. Aluminum CO2 Tank with Electric Red Epoxy Finish
This tank is produced from high strength aluminum alloy 6061-T6, a highly corrosion-resistant material. It features an eye-catching glossy powder coated epoxy finish in Electric Red that acts as an extra layer of protection against corrosion and wear. The service pressure is up to 1800 PSI/124 BAR with a test pressure of 3000 PSI/207 BAR. These cylinders are stamped with the required U.S. Department of Transportation and Transport Canada Markings. The 320 Valves are CGA approved, and have a male thread for Co2 Regulators. An average fill is good for 5-6 kegs depending upon your fill.
Includes Commercial Grade Double Gauge CO2 Regulator
This regulator works with any CO2 tank with a CGA-320 valve. The top gauge measures PSI, indicating how much CO2 pressure is inside of the keg. The side gauge measures the remaining volume of CO2 in the tank, so you'll know when it's about time to get the tank filled. This regulator features a T-style adjustment valve that can be adjusted by hand, eliminating the need for a screwdriver.
Includes 5 feet of 5/16 Inch I.D. Blue Air Line Assembly with 2 Worm Drive Clamps
This 5 foot length of 5/16" I.D. Blue Air/CO2 Tubing is made of Thermoplastic Vinyl Hose (Super Vinyl). It will not rot, swell, or dry out, and is unaffected by normal cleaning compounds. This air line assembly comes with two durable stainless steel worm drive clamps that can be easily installed or removed with a flat head screwdriver.
Includes Ball Lock Home Brew Keg Tap Complete Set
This complete ball lock home brew keg tap set includes both a gas in and beer out coupler for easy tapping of ball lock Cornelius Pepsi kegs. The gas in has a 1/4" nut and 5/16" hose barb already attached for easy connection to the air line. The beer out connector has a 3/16" hose barb that connects to the 3/16" beer line.
Includes a 3" Diameter Polished Stainless Steel Draft Tower
This NSF-approved tower is a 3" diameter single faucet metal draft tower made of polished stainless steel. It comes complete with a stainless steel faucet and 5 feet of 3/16 inch I.D. clear beer tubing. This tower is mounted using the gasket and four screws that are included.
Continuous Cold Air Channeled Through Tower to Ensure Cold Product
Heavy-Duty Stainless Steel Top
Built-In Drip Tray with Drain
Stainless Steel Interior Walls and Ceiling
Shock Reducing Rubber Floor Mat
Magnetic Gasket Provides Positive Door Sealing
Self-Closing Door with Lock
Refrigeration System Utilizes Ozone Friendly R134a Refrigerant
CFC-Free Foamed-in-Placed Polyurethane Insulation
Knockout for Remote CO2 or Nitrogen Tank
Stainless Steel Finish
ETL abd ETL Sanitation Listed for Commercial Use
Maximum Ambient Temperature: 90 degrees Fahrenheit
Minimum Ambient Temperature: The lowest temperature you want to store your kegs at. The unit does not have a heater, so if the ambient temperature is lower than the set temperature, the internal temperature will match the external temperature.
Dimensions | |
---|---|
Height | 40" |
Width | 23.5" |
Depth | 31" |
Weight | |
Unit Weight | 96.8 lbs |
Shipping Weight | 110 lbs |
Warranty | |
Labor | 1 Year |
Parts | 1 Year |
Compressor (Parts Only) | 5 Years |
Key Features | |
Built-in Capable | No |
Security Lock | No |
Keg Coupler | Optional Add-On |
Regulator | Optional Add-On |
CO2 Tank | Optional Add-On |
Cleaning Kit | Optional Add-On |
Outdoor Use | No |
Commercial Use | No |
Keg Storage Capacities | |
Full Size / 1/2-Barrel | Holds 1 |
Pony Size / 1/4-Barrel | Holds 1 |
1/4-Barrel Slim | Holds 1 |
1/6-Barrel | Holds 2 |
5 gal. Ball/Pin Lock Keg | Holds 3 |
5-Liter / Mini Keg | Holds 3 |
Exterior | |
Cabinet | Black |
Drip Tray | Yes |
Guard Rail | Yes |
Casters | Yes |
Draft Beer Tower | |
Number of Faucets | 1 |
Material | Chrome |
Height | 12.25" |
Diameter | 3" |
Door | |
Color / Material | Stainless Steel |
Number of Doors | 1 |
Door Handle | Recessed |
Field Reversible | Yes |
Accepts Custom Overlay Panel | No |
Cooling System | |
Type | Compressor |
Defrost System | Manual |
Front Ventilation | No |
Controls | |
Adjustable Thermostat | Yes |
Digital | Yes |
Electrical | |
Electrical Requirements | 115V / 60Hz |
Running Amps | 1.7 A |
The Kegco 24" Wide Homebrew Tap Stainless Steel Commercial Kegerator is a top-tier choice for homebrewers and commercial spaces alike. Here’s what makes it stand out:
Q: What is the Kegco HBK1XS-1?
A: The Kegco HBK1XS-1 is a 24" wide stainless steel commercial-grade kegerator designed specifically for homebrewers, offering reliable performance and professional-quality draft dispensing.
Q: What are its key features?
A: Key features include a durable stainless steel exterior, single tap system, spacious interior for homebrew kegs, precise digital temperature controls, and heavy-duty casters for easy mobility.
Q: Is it suitable for homebrew use?
A: Yes, it is designed to accommodate standard homebrew kegs, making it perfect for homebrewers who want to serve their creations on tap.
Q: What beverages can it dispense?
A: While optimized for homebrew beer, it can also serve other beverages like kombucha, nitro coffee, or tea with proper configuration.
Q: Why choose the Kegco HBK1XS-1?
A: Its commercial-grade durability, stylish stainless steel finish, and homebrew-specific design make it an excellent choice for showcasing and enjoying your homebrewed beverages.
Shop securely with our encrypted checkout system and various payment options.
Enjoy free delivery on all orders with fast, reliable shipping.
Official distributor of premium brands with authentic products.
Our team is available 7 days a week for product help and support.